Removal PM2.5 Dust Odor 380m3/h 100m2 Wall Mounted ERV

130W Wall mounted recovery energy ventilation removal of PM2.5 duct odor

Wall Mounted Energy Recovery Ventilator (ERV)

Ductless Energy Recovery Ventilator

The Wall Mounted Energy Recovery Ventilator allows for efficient fresh air ventilation in situations where ducted units cannot be used. The ERV can be located anywhere on an external wall and is designed for simple installation. 

Features

- The option of sensible-only or enthalpy type heat exchangers.

- Integrated supply air and exhaust air fans.

- Integrated filters.

- DC brushless motor, energy saving.

► SPECIFICATION

► SIZE

► ADVANTAGE

★ PM2.5 removal effect diagram

solubility

minute            10      20      30       40      50       60     minute         10       20      30       40       50       60

When the machine is started for 1 hour, PM2.5 decreases by about 25 ug / m³, which is the high quality air standard,

formaldehyde drops to about 0.3 mg / m³

★ Efficient filtration

Primary filter

Large filtration area and large dust capacity

The spreading area of primary filter is about 3 m³,It can filter large particles,

block mosquitoes, hair, etc.

Characteristic:

The primary filter is made of fiber cotton,It has the characteristics of large filtering area, large dust capacity, low wind speed and low resistance. The service life of the follow-up filter screen depends on this layer.

Medium efficiency filter

More than 97% of PM2.5 was filtered at one time

High efficiency filter

H13 medical grade filter screen, single filtration 99.95% PM2.5

Characteristic:

PTFE composite filter element is adopted,compared with the traditional glass fiber, PTFE filter paper will not emit chemical gas

The spreading area of primary filter is about 30 m^3,depending on the service environment, it is generally replaced within 1-2 years.