706 CFM Intelligent High-Efficiency factory fresh air heat pump air ventilation system / heat recovery ventilation
1. Crossflow heat exchanger: Made of Aluminum, cross flow passages, sensible heat exchanger.
2. Fresh air filters: Triple filtration to ensure air cleanness, G4+F7+H10. Aluminum frame, solid, stable, ametabolic and anti corrosive.
3. Return air filter: Nonwoven material, G4 class, filtering return air. Aluminum frame, solid, stable, ametabolic and anti corrosive.
4. Bypass system: By adjusting the opening angle, different fresh air volume can go through the heat exchanger and by-pass synchronously. When it’s opened completely, the air goes without passing the heat exchanger.
5. Evaporator: Plate fin heat exchanger, with coated hydrophilic fins.
6. Connection box: Circuit board, core of intelligent control system -Power switch, power supply to the compressor, fans and by-pass Wiring terminal, easy access for field connection.
7. Electrical heater: 370W power controlled by the intelligent set program signal.
8. Drain tray: Made of coated galvanized steel, collecting the drain water from heat exchanger, evaporator and condenser.
9. Drain pump -Integrated with ball cock to test the water level, the water is drain out automatically if the water is full.
► FUNCTIONS OF CONTROLLER
1. Operation data display
2. Airflow adjustment according to ambient temperature
3. Room temperature setting
4. Modbus connection
5. Auto defrosting
6. Auto bypass
7. Running mode selection: AUTO-COOLING-HEATING-VENTILATION
8. Auto restart
9. Filter monitor
10. Auto water drain
A. High pressure or low pressure alarm
B. Communication failure alarm
C. Frosting alarm
D. Short connection or wrong connect of the sensors
E. Sensors fault or short circuit alarm
F. Over heating of electrical heater
G. Fire alarm
H. Filter alarm
12. Multiple protection :
A. High-voltage protection
B. Low-voltage protection
C. Thermal overload protection
D. Over discharge temp. protection of compressor
E. Low supply air temperature protection
F. Drain pump failure protection
Ventilating(reducing CO2),ultra low noise,heat exchange(energy recovery ),heat pump system(cooling and heating),multistage filtration,remove formaldehyde,dehumidify,save energy(environment protection),intelligent.(visualize quality air).
Air quality analysis of indoor :
CO2 less than 1000ppm: fresh air, breathe smoothly;
CO2 1000ppm~2000ppm: the air is getting thick.
CO2 2000ppm~5000ppm: make you want to sleep easily or get the headache;
CO2 Larger than 5000ppm: lack of oxygen seriously or cause coma.
If you install CS fresh air heat pump, indoor CO2 is 500ppm-600ppm, you could get fresh air and breathe smoothly.
1. Heat exchanger and heat pump system make up the double-stage energy recovery system.
2. Balancing ventilation, efficient and rapid handing of indoor air, increasing air quality.
3. DC mute fan.
4. Specially designed high efficiency and low resistance PM2.5 filter screen. Indoor PM2.5 removing could be nearly 100%.
5. Home environment real-time monitoring.
6. CS fresh air heat pump got the invention patent.
7. Adopt the plate heat exchanger, control of temperature difference and reduce the pollution source.
8. CS fresh air heat pump with high heat recovery exchange efficiency.
||Ceiling fresh air ventilation
|FRESH AIR VOLUME
|AIR SUPPLY MODE
Duct air supply
► DETAIL DISPLAY
Touch color display
TFT real color screen, more refreshing color, sensitive touch, simple operation
Stable and durable ceiling hook
Made of high quality stainless steel, not easy to rust, durable
Easy to replace consumables
Unscrewing the stud manually can replace the consumables, which is convenient and quick
The cabinet is light and thin
Ceiling type installation, light and thin, does not take up space height
Protect the health of you and your family
Eliminating visible and invisible air pollution
Pet hair Urban waste Pollen PM2.5 Second hand Viral Formaldehyde
gas smoke bacteria
Big wind wheel Low speed Low noise Long service life
► Fresh air and exhaust air use one brushless DC motor
► The wind wheel and impeller is designed, moulded and processed by our company.
We can control the quality effectively.
► Wind wheel is 2.5 times larger than other brands.
► It has the characteristics of high efficiency, low noise, large air volume and stable operation.
special volute big air volume DC brushless special volute
wind wheel motor
Our staffs of sales and technical support is available to help you in selecting the right protection for your application as well as to provide you with samples of our products for evaluation. At CS, we are committed to providing the highest level of customer service, competitive pricing, speedy delivery and a comprehensive, cutting-edge product offering. Our ultimate goal is your satisfaction.
How to Order
We need to know the size, quantity and others.
Discuss all the details with you and make the sample if needed.
Start the mass production after getting your payment (deposit).
Receive your air goods.
Before the order to be confirmed, we would show you the certificate of each details .
Every ERV will be quality checked before packing.
Before delivery clients could send QC or the third party to check the quality. We will try our best to help you when problem occurred.
Any problem happening in our products will be solved at the most prompt time.
We always offer relative technical support.
Quick response, all your inquiry will be replied within 24 hours.
Q: About CS ERV ventilation lifetime
A: The lifetime will vary depending on the hours of usage, air quality and location of the ERV air cleaner. Normally the filter will need to be replaced semiannually. Clean the dust and contaminants with vacuum cleaner or hair dryer (cool air) and dry it out in the sun for 3 hours to maintain the best purifying effect.
Q: Are you a factory?
A: Yes, we are a ISO9001-certified factory devoting to the developing, manufacturing and sales of the fresh air ventilator.
Q: I need your price list of all products, do you have a price list ?
A: We do not have a price list of all of our products. Because we have so many items, and it's impossible to mark all of their price on a list. And the price are always changing because of the producing cost. If you want to check any price of our products, please feel free to contact us. We will send offer to you soon!
Q: I can't find the product on your catalogue, can you make this product for me?
A: Our catalogue shows most of our products, but not all. So just let us know what product you need and how many you want. If we do not have it, we can also design and make a new mould to produce it. For your reference, making a ordinary mould will take about 35-45 days.
Q : Can you make customized products and customized packaging?
A: Yes. We've made a lot of customized products for our customers so far. And we've made many moulds for our customers. About customized packaging, we can put your logo or other labels on the packaging. It's no problem. Just have to point out that , it will cause some additional cost.
Q: Can you provide samples ? Are the samples free ?
A: Yes, we can provide samples for test or quality checking. And sample cost will be refunded when bulk order is over MOQ.
Q : How to ship my order? Is it safe?
A: For samples, we will send it by Express, such as DHL, FedEx, UPS, TNT, EMS.That's a Door to Door service. For bulk orders, we will send them by air or by sea. We will use good packing and ensure the safety. We will be responsible to any product damage caused on delivery.
Q: Do you have a guarantee of your product quality?
A: We have a guarantee of one year.
Q: Can I become an Agent / Dealer of CS products?
A: Welcome! But please let me know your country / area first, We will have a check and then talk about this. If you want any other kind of cooperation, do not hesitate to contact us.